Researchers manufacture wafer-scale films of novel optoelectronic materials at room temperature
Researchers at the University of Southampton’s Zepler Institute have successfully fabricated and characterised large-area 2D films of molybdenum disulphide (MoS2) at room temperature using a process which is scalable to any size wafer. Previously only commercially available in small flakes, these wafer-scale films pave the way for the large-scale manufacture of a wide variety of devices including flexible and transparent optoelectronics, gas sensors, memory devices and photovoltaics (PV).
Fabricated using ambient pressure chemical vapour deposition (CVD), the MoS2 films have an important advantage over other 2D materials like graphene: they enable the emission and detection of light.
MoS2 has exceptional carrier mobility and is widely believed to be a strong contender for the next generation of electronics which will soon take over as the silicon chip reaches its fundamental limits. In addition, MoS2 is an N-type semiconductor for PV applications. By processing initially at room temperature, rather than at the high temperatures typically used (in the region of 800-900oC), it is possible to deposit MoS2 on a wider range of substrates, namely those with low thermal stability like flexible displays. The technique also minimises stress on other previously deposited layers and helps reduce processing costs.
2D materials are set to gain prominence as Graphene Week 2015 comes to the UK this week. The conference in Manchester, commissioned by the European Graphene Flagship programme, will focus on the science and technology of graphene and related 2D materials and their emerging applications. The work on MoS2 films at the Zepler Institute has not only improved their manufacturability but also broadened the range of uses for this enabling technology:
“Using flakes of MoS2, which are typically only a few hundred square microns in area, to make devices is impractical time-consuming and inefficient and do not provide a practical route to rapid prototyping and existing semiconductor fabrication protocols. For these new materials to be adopted in mainstream electronics, they must be compatible with the semiconductor processing lines used in the mass production of electronic chips.’ said Dan Hewak, Professor of Optoelectronics at the Zepler Institute. “Our expertise in novel thin-film fabrication coupled with our ultra-high purity raw material processing facility has enabled us to purify and synthesise large area films to a consistency and purity level not available commercially.”
The ambient pressure CVD process that Hewak and his colleagues have developed is an industrially-scalable and controllable deposition methodology and can be used to grow films on a variety of different substrates including plastic.
“We have also developed a technique for lifting these large-area films off the substrate they were grown on and depositing them onto a different substrate,” said Hewak. “This means the films can be put onto any material, opening up entirely new applications.”
Nanyang Technological University, Singapore has been using these films in its research for the past two years. “There have been extraordinary efforts devoted to the study of 2D materials, especially MoS2. For these materials to be useful in real applications and for many fundamental studies, the ability to fabricate uniform large-area thin films is critical. We are very pleased with the quality and uniformity of large-area CVD grown MoS2 thin films from Southampton which have helped us on the study of Ultrafast Carrier Thermalization and Cooling Dynamics in Few-layer MoS2. We are looking forward to further collaboration in this emerging 2D material at the device level.”, says Professor Shen Ze Xiang, Professor, Program Chair (Sustainable Earth), School of Physical and Mathematical Sciences, Nanyang Technological University.
Hewak and his colleagues are developing processes for the fabrication of a range of transition metal dichalcogenides and are part of the Chalcogenide Advanced Manufacturing Partnership (ChAMP). ChAMP is an EPSRC-funded partnership between five leading universities and 15 industrial partners dedicated to establishing the UK as a world leader in chalcogenide-glass technology through the development of advanced manufacturing techniques and practical application demonstrations.
“The significant breakthrough in large-area thin films of MoS2 is a very exciting development and Southampton's world leading capability presents the UK with unique opportunities for new devices and applications. The potential to integrate these new materials with existing semiconductors such as III-Vs is very attractive and we are keen to build collaboration and joint development in this area based on the new technology" says Professor Jon Heffernan, Director of the EPSRC National Centre for III-V Technologies at the University of Sheffield.
For more information on ChAMP, please visit the partnership website http://chalcogenide.net/
Notes to editors:
- Members of the Zepler Institute team will be at Laser World of Photonics, Munich, Germany, June 22-25 2015 on the Optoelectronics Research Centre (ORC) stand (Hall B2 Stand 139). www.orc.soton.ac.uk
- The Zepler Institute is the University of Southampton’s multidisciplinary centre for photonics, electronics and quantum technologies. It is the largest of its kind in the UK and was launched in 2013 by Vint Cerf, Vice President and Chief Internet Evangelist for Google. The Director is Professor Sir David Payne, a world class technology pioneer. The vast transmission capacity of today’s internet results directly from the erbium-doped fibre amplifier (EDFA) invented by Sir David and his team in the 1980s.
- The 2D materials are fabricated and characterised in Zepler Institute’s £120m Cleanroom Complex, home to the best set of nanoelectronics and photonics fabrication capabilities in the UK. Researchers in its Novel and Compound Glass Facility are now melting and purifying some of the highest quality chalcogenide glasses in the world for use in aerospace, healthcare, electronics and telecommunications.
- The Chalcogenide Advanced Manufacturing Partnership (ChAMP) is funded by the Engineering and Physical Sciences Research Council (EPSRC). The partnership involves leading academics from Southampton, Exeter, Oxford, Cambridge and Heriot-Watt Universities and over 15 industrial collaborators, from large multi-nationals to SMEs.
- Chalcogenides are materials containing one or more chalcogen elements (e.g. S, Se or Te) as a substantial constituent. They are fundamentally semiconductors. Chalcogenides, are particularly noted for their functionality, with strong, varied responses to optical, electrical and thermal stimuli.