The University of Southampton
University of Southampton Institutional Repository

Diversity of fiber laser technology

Diversity of fiber laser technology
Diversity of fiber laser technology
High power fibre laser technology has come of age over the past five years or so, due primarily to developments in fibre design and fabrication and semiconductor pump lasers. Fibre is now emerging as the technology of choice for a wide range of laser applications. Nowhere has the progress been more striking than in terms of the maximum continuous wave output power achievable from a single-mode fibre laser. Up until the start of 2001 the maximum reported output power from such a laser was ~110W. However, since then the reported power levels have risen rapidly and steadily such that by late 2006 values as high as 2.5kW were achieved with great prospects for further extension to the 10kW regime. Far higher power levels than this should be achievable in due course using beam combination technology. Fibre lasers are thus consequently now strong competitors to kW-class 'bulk' and thin-disk solid state lasers (for example, Nd:YAG and Yb:YAG) and CO lasers for a wide range of industrial applications including materials processing, aerospace and defense. Relative to these competing technologies fibre lasers benefit from the advantages of compactness, efficiency, beam quality and arguably most importantly ready thermal management due to the large surface-area to volume ratio of the fibre geometry. The fibre laser is thus seen to have the potential to revolutionize both the range of uses and economics of high power laser systems.
Richardson, D.J.
ebfe1ff9-d0c2-4e52-b7ae-c1b13bccdef3
Richardson, D.J.
ebfe1ff9-d0c2-4e52-b7ae-c1b13bccdef3

Richardson, D.J. (2007) Diversity of fiber laser technology. Conference on Lasers and Electro-OpticsCLEO/Europe International Quantum Electronics Conference (IQEC) 2007, Munich, Germany. 17 - 22 Jun 2007. 1 pp .

Record type: Conference or Workshop Item (Other)

Abstract

High power fibre laser technology has come of age over the past five years or so, due primarily to developments in fibre design and fabrication and semiconductor pump lasers. Fibre is now emerging as the technology of choice for a wide range of laser applications. Nowhere has the progress been more striking than in terms of the maximum continuous wave output power achievable from a single-mode fibre laser. Up until the start of 2001 the maximum reported output power from such a laser was ~110W. However, since then the reported power levels have risen rapidly and steadily such that by late 2006 values as high as 2.5kW were achieved with great prospects for further extension to the 10kW regime. Far higher power levels than this should be achievable in due course using beam combination technology. Fibre lasers are thus consequently now strong competitors to kW-class 'bulk' and thin-disk solid state lasers (for example, Nd:YAG and Yb:YAG) and CO lasers for a wide range of industrial applications including materials processing, aerospace and defense. Relative to these competing technologies fibre lasers benefit from the advantages of compactness, efficiency, beam quality and arguably most importantly ready thermal management due to the large surface-area to volume ratio of the fibre geometry. The fibre laser is thus seen to have the potential to revolutionize both the range of uses and economics of high power laser systems.

Text
3663.pdf - Author's Original
Download (177kB)

More information

Published date: June 2007
Venue - Dates: Conference on Lasers and Electro-OpticsCLEO/Europe International Quantum Electronics Conference (IQEC) 2007, Munich, Germany, 2007-06-17 - 2007-06-22

Identifiers

Local EPrints ID: 47800
URI: http://eprints.soton.ac.uk/id/eprint/47800
PURE UUID: 7fb26e21-344b-49d5-ad51-becfe1ed106a
ORCID for D.J. Richardson: ORCID iD orcid.org/0000-0002-7751-1058

Catalogue record

Date deposited: 09 Aug 2007
Last modified: 16 Mar 2024 02:40

Export record

Download statistics

Downloads from ePrints over the past year. Other digital versions may also be available to download e.g. from the publisher's website.

View more statistics

Atom RSS 1.0 RSS 2.0

Contact ePrints Soton: eprints@soton.ac.uk

ePrints Soton supports OAI 2.0 with a base URL of http://eprints.soton.ac.uk/cgi/oai2

This repository has been built using EPrints software, developed at the University of Southampton, but available to everyone to use.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.

×